Home Support Projectors PowerLite Series Epson PowerLite Home Cinema 3700

How do I connect my image source to the product?

  • See below.

    Connecting to an HDMI Video Source

    If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality.
    1. Connect the HDMI cable to your video source's HDMI output port.
    2. Connect the other end to one of the projector's HDMI ports. If you are connecting an optical HDMI cable, you must also connect the cable's USB power connector to the 1000mA port.

    Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.

    You can also select the Fast setting using the Fine/Fast button on the remote control to reduce lag time.

    Note: When an audio/video source that meets the HDMI CEC standard is connected to the projector's HDMI port, you can use the projector's remote control to control certain features of the linked device by pressing the HDMI Link button on the remote control and setting HDMI Link to On.

    Related references
    Projector Feature Settings - Settings Menu

    Connecting to Computer Sources

    Follow the instructions in these sections to connect a computer to the projector.

    Connecting to a Computer for VGA Video
    Connecting to a Computer for HDMI Video and Audio
Published:  Sep 12, 2016 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​
Please enter a valid email address