text.skipToContent text.skipToNavigation
Home Support Projectors PowerLite Series Epson PowerLite Home Cinema 3100

How do I use the Picture-in-Picture feature?

    See below.

    Using Picture in Picture

    You can use Picture in Picture mode to view two image sources simultaneously.

    Note: You can display only HDMI video sources when using Picture in Picture mode.

    Note: You cannot use Picture in Picture while projecting 3D images or when Image Processing is set to Fast in the Signal menu.

    1. Turn on the projector and switch to the HDMI image source you want to use.
    2. Press the P-in-P button on the remote control.

      The second HDMI video source appears as a sub-screen in the corner of the image.

      Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust the size and position of the sub-screen.

    3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at least three seconds.
    4. Press the P-in-P button again to close the sub-screen and resume normal projection.
Published:  Sep 12, 2016 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address