Nothing projects on the screen. What should I do?

• If no image appears, try the following solutions:

  • Make sure the lens cover is open all the way.
  • Press the A/V Mute button on the remote control to see if the image was temporarily turned off.
  • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
  • If you connected your video source to the Computer2/Monitor Out port, make sure you set the Monitor Out Port setting to Computer2.
  • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
  • Press the Menu button. If the projector menu is able to display, there may be a problem with the connected video source, cable connection, or port.
  • Check the settings on the Signal menu to make sure they are correct for the current video source.
  • Adjust the Brightness setting or select the Normal Power Consumption setting.
  • Check the Display setting to make sure Messages is set to On.
  • If the projector does not respond when you press the control panel buttons, the buttons may be locked. Unlock the buttons.
  • If the projector does not respond when you press buttons on the remote control, make sure the remote receivers are turned on.
  • For images projected with Windows Media Center, reduce the screen size from full screen mode.
  • For images projected from applications using Windows DirectX, turn off DirectX functions.
  • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.
  Related tasks
  Unlocking the Projector's Buttons
  Related references
  Projector Setup Settings - Extended Menu
  Image Quality Settings - Image Menu
  Input Signal Settings - Signal Menu
  Projector Reset Options - Reset Menu