text.skipToContent text.skipToNavigation
Home Support Projectors Cinema Series Epson Home Cinema 1060

I see a color cast over the projected image. What should I do?

    Try the following:

    • If your image has a blue cast when you connect your video equipment (DVD player, satellite receiver, etc.) to the projector using a component-to-VGA video cable, try the following:
      • Make sure the red, green, and blue connectors on the cable match the red, green, and blue component video-out connectors on your video equipment.
      • Make sure the projector's Input Signal setting is set to Component. (The default Input Signal setting is Auto.)
      • Make sure the connected video equipment is set up to output video.
    • If your image has a green cast when you project movies from a DVD player, make sure the projector's Input Signal setting is set to Auto or Component.
    • If your image has a red, pink, or magenta cast when you project from a computer with a VGA connection, make sure the projector's Input Signal setting is set to Auto. If this doesn't help, set it to RGB.
Published:  Sep 28, 2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address