text.skipToContent text.skipToNavigation
Home Support Projectors Cinema Series Epson Home Cinema 1060

How can I improve the image quality?

    Make sure you select the best Color Mode for your picture and viewing environment, and then use the settings in the Image menu to finish adjusting the picture.

    For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn't support HDMI, connect it to one of the following ports (highest quality listed first): Computer with a VGA-to-component adapter cable (for component video) or Video (for composite video).

    If you are viewing a video from a device connected to the projector's Video port, adjust the Deinterlacing and Noise Reduction settings, if available for your video source.

    Note: The Noise Reduction setting is not available if you have done the following:

    • Set the Deinterlacing setting to Off
    • Selected a digital RGB or an interlaced (480i/576i/1080i) input signal
    Related concepts
    Color Mode
    Related references
    Image Quality Settings - Image Menu
Published:  Sep 28, 2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address