Part of my image is blurry or out of focus. What should I do?
- Adjust the image focus.
- Check the lens for condensation.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
- Verify that the throw distance from the projector to your projection surface meets the specifications in the Installation Guide included with your mount.
- If you are projecting from a computer, adjust the computer's resolution to match the projector's native resolution, if possible.
If the projected image is fuzzy or blurry, try the following solutions:
Focusing the Image Using the Focus Buttons
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Published: Jun 21, 2018 Was this helpful? Thank you for the feedback!