Support Wearables Moverio Epson Moverio BT-40S

How should I clean and disinfect the product?

  • Do the following to clean the product:

    1. Disconnect all cables from the product.
    2. Clean the connector ports on the Intelligent Controller with a dry cloth. If you're unable to clean the ports with a dry cloth, use a damp cloth.
    3. Clean the lens or camera with a soft, dry cloth. Do not use liquid, organic, or chemical cleansers.
    4. If you cannot get the headset clean with a dry cloth, use a damp cloth.

    To disinfect the product, do the following:

    1. Disconnect all cables from the product.
    2. Clean the connector ports on the Intelligent Controller with a dry cloth. Make sure the connector ports on the interface unit are free from dirt or foreign objects.
    3. Lightly spray one of the disinfectant listed below on a cloth and clean the product.
      • Alcohol-based disinfectants
      • Sodium hypochlorite
      • Hypochlorous acid water
    4. Wipe off any disinfectant remaining on the product with a damp cloth. Make sure the product is completely dry before you use it.

      Caution:
      Do not spray disinfectant directly on product.

Published:  Mar 17, 2021 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​