Support Projectors PowerLite Series Epson PowerLite 1288

How do I set up a wireless connection with the product?

  • You must set up your projector and computer for wireless projection.

    To use the projector over a wireless network, install the Epson 802.11b/g/n wireless module in the projector, then connect wirelessly to your projector, configure the connection using the projector's Network menus. Do not install any other type of wireless module.

    Note: The Epson 802.11b/g/n wireless LAN module is optional for the PowerLite X49/W49/118/119W/982W. The wireless module is built-in for the PowerLite 992F/1288. You can purchase the wireless LAN module (part number (V12H005A02) from the Epson Store.

    After connecting and setting up the projector, install the projector software. You can download the software and manuals as necessary.

    You can use Epson iProjection to project static images and presentations over a wireless network.

    Note: Epson iProjection is not recommended for use with streaming video.

    See the link(s) below for instructions.

    Related tasks
    Installing the Wireless LAN Module
    Selecting Wireless Network Settings Manually
    Selecting Wireless Network Settings in Windows
    Selecting Wireless Network Settings on Mac
    Related references
    Wireless LAN Menu Settings
Published:  May 20, 2021 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​