The image appears stretched when I project from my computer. What should I do?
Try the following:
- Press the Aspect button on the remote control to set the image aspect ratio to Normal.
- Select a different image aspect ratio in the projector's Signal menu.
Note: If you're using an HDMI source, the input signal determines the image aspect ratio. You cannot change the image aspect ratio. Try changing the output resolution of the input signal instead.
- Set the projector's Resolution setting to Auto so the projector automatically identifies the resolution of the input signal. If you are projecting from a computer using a VGA connection, select Wide (for widescreen images) or Normal (for 4:3 ratio images), if necessary.
- Check your computer's display settings, disable dual display so that your image displays through the projector only, and set the resolution within the projector's limit. (See your computer manual for details.)
- Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting. (See your software help for details.)
Input Signal Settings - Signal Menu
Published: Nov 19, 2020 Was this helpful? Thank you for the feedback!