The product's status lights don't flash or turn on. What should I do?

• Check the following:

  • Make sure the power cord is plugged into a functional outlet.

    Note: When power is connected, the status lights do not flash. Press the Power button on the control panel or remote to turn on the projector. You should see the status lights flash at this point. Make sure the Lock Setting is off (Home Cinema 2200 only).

  • Make sure the product is turned on and projecting an image.
  • Make sure the lights are enabled. To enable the lights, press the Menu button on the remote control and select Extended > Operation > Illumination > On.
  • Make sure the Lock Setting is off. To turn off this setting, press the Menu button on the remote control and select Settings > Lock Setting > Control Panel Lock > Off.