Part of my image is blurry or out of focus. What should I do?

• If the projected image is fuzzy or blurry, try the following solutions:

  • Adjust the image focus.
  • Clean the projector lens.
  • Position the projector close enough to the screen, and directly in front of it.
  • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
  • Adjust the Sharpness setting to improve image quality.
  • If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to match the projector's native resolution, if possible.
  Related tasks
  Cleaning the Lens
  Focusing the Image Using the Focus Lever
  Correcting Image Shape with H/V Keystone
  Correcting Image Shape with Quick Corner
  Adjusting Image Sharpness
  Related references
  Projector Setup and Installation Options
  General Projector Specifications