Nothing projects on the screen. What should I do?

• If no image appears, try the following solutions:

  • Make sure the lens cover is off.
  • Press the  A/V mute button on the projector remote control to see if the image was temporarily turned off.
  • Check the status lights to confirm the projector is operating normally.
  • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
  • Try using a shorter HDMI cable.
  • Try connecting the video source directly to the projector.
  • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
  • If you are projecting from a streaming device, make sure it is powered by the USB power cable inside the projector. Turn on the connected streaming device or video source, and press the play button to start a video, if necessary.
  • Make sure the connected device meets the HDMI CEC standard. See the documentation supplied with the device for more information. If necessary, set the CEC function for the connected device again and restart the device. Turn off the projector and the connected streaming device or video source, and then turn them back on.
  • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
  • Make sure the computer's display resolution does not exceed the projector's resolution and frequency limits. If necessary, select a different display resolution for your computer. (See your computer manual for details.)
  • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.
  Related tasks
  Turning On the Projector
  Shutting Off the Picture and Sound Temporarily
  Related references
  Projector Light Status
  Image Quality Settings - Image Menu
  Input Signal Settings - Signal Menu
  Projector Setup Settings - Extended Menu