How do I set up my projector?

• You can place the projector on almost any flat surface to project an image.

  You can also install the projector in a ceiling mount if you want to use it in a fixed location.

  Attention: When using a ceiling mount, use commercially available M6 screws (up to a depth of 0.55 inches [14 mm]) to attach the mount to the projector.
  

  There is no vertical or horizontal limit to how the projector can be installed.

  Warning: The EB-PQ2216B, EB-PQ2216W and EB-PQ2220B are class A products. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

  Keep these considerations in mind as you select a projector location:

  • Place the projector on a sturdy, level surface or install it using a compatible mount.
  • Place the projector parallel to the screen.
  • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
  • If there is not enough space around the projector and the internal temperature of the projector increases, the brightness of the light source may decrease.
  • Make sure hot air from the exhaust vent does not go into the air intake vent.
  • Position the projector within reach of a grounded electrical outlet or extension cord.

  Make sure you read the safety instructions when placing or mounting your projector. See the link below.

  Related reference
  • Important Safety Instructions