Support Projectors EH Series Epson EH-QB1000B

How do I set up my projector?

  • You can place the projector on almost any flat surface to project an image.

    You can also install the projector in a ceiling mount if you want to use it in a fixed location.

    Keep these considerations in mind as you select a projector location:

    • Place the projector on a sturdy, level surface or install it using a compatible mount.
    • Place the projector so it squarely faces the screen, not at an angle.
    • If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.
    • Try not to use the projector in locations subject to high humidity and dust, or in locations subject to smoke from fires or tobacco smoke.
    • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
    • Position the projector within reach of a grounded electrical outlet or extension cord.
    Related tasks

    Projector Setup and Installation Options

    You can set up or install your projector in the following ways:

    Front

    Rear

    Front Ceiling

    Rear Ceiling

    Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If the projector cannot be centered in front of the screen, use lens shift to reposition the image instead of using keystone correction for better image quality.

    Note: If you use the projector tilted at an angle of more than three degrees, it could be damaged and cause an accident.

    If you project from the ceiling or from the rear, be sure to select the correct Projection setting in the projector's Installation menu. If necessary, enable the Inv Direction Button setting in the projector's Operation menu.

    Related reference
Published:  Jul 18, 2024 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​