The displayed image is not rectangular. What should I do?
-
If the projected image is not evenly rectangular, try the following steps until the problem is solved.
Note: Focus and keystone distortion of the projected image are automatically corrected under the following conditions:
- When the size of the projected image (diagonal length) before correcting focus and keystone distortion is from 30 to 100 inches.
- When the projection distance is about 28 to 87 inches (0.7 to 2.2 m).
- When the installation angle of the projector toward the projection surface is within 20º right, left, up, or down.
- Place the projector directly in front of the center of the screen, facing it squarely, if possible.
- Make sure that Auto Keystone Correction At Startup and Auto Keystone Correction on Movement are set to On in the Projector menu.
- Projector > Image Correction > Advanced > Auto Keystone Correction At Startup
- Projector > Image Correction > Advanced > Auto Keystone Correction on Movement
- Select Auto Keystone Correction in the Projector menu to automatically adjust the image shape.
- Projector > Image Correction > Auto Keystone Correction
- When projecting on a screen, use Fit to Screen to automatically correct the shape and position of the image so that it fits on your screen.
- Projector > Image Correction > Fit to Screen
- Adjust the image shape manually using Manual Keystone Correction in the Projector menu.
- Projector > Image Correction > Manual Keystone Correction
Published: Sep 19, 2024
Was this helpful? Thank you for the feedback!