Part of my image is blurry or out of focus. What should I do?
-
If the projected image is fuzzy or blurry, try the following steps until the problem is solved.
Note: Focus and keystone distortion of the projected image are automatically corrected under the following conditions:
- When the size of the projected image (diagonal length) before correcting focus and keystone distortion is from 30 to 100 inches.
- When the projection distance is about 28 to 87 inches (0.7 to 2.2 m).
- When the installation angle of the projector toward the projection surface is within 20º right, left, up, or down.
- Hold down the focus button on the remote control to perform Auto Focus.
- Press the focus button on the remote control to display the focus adjustment screen and adjust focus manually.
- Check the following items:
- Position the projector close enough to the screen.
- Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
- Clean the projector's lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
- Adjust the Sharpness setting in the projector's Display & Sound menu to improve image quality.
- Display & Sound > Picture > Custom > Sharpness
- If you are projecting from a computer, use a lower resolution or select a resolution that matches the projector's native resolution.
Published: Sep 19, 2024
Was this helpful? Thank you for the feedback!