I see the message <strong>No Signal</strong>. What should I do?
-
If the "No Signal" message appears, try the following solutions:
- Press the Search button on the remote control or the Source Search button on the control panel until you see the image from the source you want.
- Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
- Check the connection from the projector to your video sources.
- If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
- If necessary, turn the projector and the connected computer or video source off and then on again.
- If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
Published: Sep 19, 2024
Was this helpful? Thank you for the feedback!