How do I set up my projector?

• You can place the projector on almost any flat surface to project an image.

  You can also install the projector in a ceiling mount if you want to use it in a fixed location.

  When using a ceiling mount, use commercially available M6 screws (up to a depth of 0.55 inches [14 mm]) to attach the mount to the projector.
  

  Note: Do not stack projectors directly on top of each other.
  

  There is no vertical or horizontal limit to how the projector can be installed.

  Keep these considerations in mind as you select a projector location:

  • Place the projector on a sturdy, level surface or install it using a compatible mount.
  • Place the projector parallel to the screen.
  • If you use the projector at altitudes above 7500 feet (2286 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.
  • Try not to use the projector in locations subject to high humidity and dust, or in locations subject to smoke from fires or tobacco smoke.
  • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
  • If there is not enough space around the projector and the internal temperature of the projector increases, the brightness of the light source may decrease.
  • Make sure hot air from the exhaust vent does not go into the air intake vent.
  • Position the projector within reach of a grounded electrical outlet or extension cord.
  • Protect your hands with gloves or other safety items when installing the projector.

  Make sure you read the safety instructions when placing or mounting your projector. See the link below.

  Related concepts
  • Projection Modes
  Related tasks
  • Changing the Projection Mode Using the Remote Control
  • Changing the Projection Mode Using the Menus
  Related reference
  • Important Safety Information

  Projector Setup and Installation Options

  You can set up or install your projector in the following ways:

  Front
  

  Rear
  

  Front ceiling
  

  Rear ceiling
  

  CAUTION:
  Be sure to leave the following amount of space around the projector to avoid blocking the air exhaust and intake vents. Do not install the projector in a location that does not allow air to circulate, such as on a shelf or in a box.If there is not enough space around the projector and the internal temperature of the projector increases, the brightness of the light source may decrease. Make sure hot air from the exhaust vent does not go into the air intake vent.111.8 inches (30 cm)27.9 inches (20 cm)33.9 inches (10 cm)

  If you are installing multiple projectors next to each other, be sure to leave at least 28 inches (70 cm) of space between the projectors. Also, make sure heated air from an exhaust vent does not go into the air intake vent of another projector.
  

  1	28 inches (70 cm)

  If you use a partition, you can narrow the space between the projectors.
  

  1	12 inches (30 cm)

  You can mount the projector to the ceiling at any horizontal or vertical angle.