Home s0 Windows 10 Support

How do I install the software for my product if I don't have a CD/DVD drive?

  • You can download the software from the Downloads tab for your product. To install the software, do the following:

    Note: The following information does not apply to Windows 10 Mobile. You do not need to install any software to print from Windows 10 Mobile.

    1. Go to the Epson Support page and search for your product.
    2. Do one of the following:
      • If your product is a printer or all-in-one (a printer with a scanner), select Downloads > Drivers and Utilities Combo Package. Follow the on-screen instructions to install the software.
      • If your product is a scanner (with no printer), select Downloads > Drivers > Scanner Driver and EPSON Scan Utility or Scanner Driver and Epson Scan 2 Utility. Follow the on-screen instructions to install the software.

        Note: If your scanner is connected to your computer or tablet with a wired or wireless connection, follow the instructions in one of the sections below, if necessary.

    Configure Epson Scan for a Network Connection

    1. Select Windows 10 start > EPSON > EPSON Scan Settings.
    2. Select Network and select Add.
      EPSON Scan Settings window
    3. Select the IP address for your product and select OK.
      Add window with an IP address highlighted
    4. Select OK again.

    Configure Epson Scan 2 for a Network Connection

    1. Make sure your product is connected to the same network as your computer or tablet.
    2. Start Epson Scan 2. The Scanner Settings window appears.
    3. Select Enable Editing if you see it and select Yes on the screen that appears.
    4. Select Add. Make sure your product is selected as the Model in the screen that appears.
      Add Network Scanner window with IP address highlighted
    5. Select the IP address for your product.

      Note: If nothing appears in the Search for Network box, make sure your product is connected to the same network as your computer or tablet. If your product is connected to the same network but the box is still blank, contact Epson Support.

      Note: If you don't know your product's IP address, you can print a network status sheet to obtain it.

    6. Select Add. Your product appears in the Scanner Settings window.
      Scanner Settings window
    7. Select OK.
Published:  Aug 11, 2015 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​