I see the message Unable to connect to network scanner. Check the scanner, network, and connection settings. What should I do?

• Do the following:

  1. Make sure your product is connected to the same Wi-Fi network as your computer.
  2. Click Yes on the error message screen. The Scanner Settings window appears.
  3. Click Enable Editing or and click Yes on the screen that appears. If necessary, enter your computer's administrator password and click OK.

     Note: If you do not see the Enable Editing button, run the Epson Scan 2 Utility as the administrator. To run the Epson Scan 2 Utility as the administrator, navigate to the Epson Scan 2 Utility shortcut, right-click the shortcut, and then click Run as administrator.

  4. Select your product from the list in the Scanner Settings window and click Delete or the button.

     Windows
     

     Mac
     

  5. Click Add or the button. Make sure your product is selected as the Model in the screen that appears.
  6. Select the IP address for your product.

     Note:If you don't know your scanner's IP address, you can use EpsonNet Config to find it. You can download EpsonNet Config from the Downloads tab on your product's support page.

     After EpsonNet Config is installed on your computer, do the following:

     • Windows 11: Click , then search for EpsonNet Config and select it.
     • Windows 10: Click > EpsonNet > EpsonNet Config.
     • Windows (other versions): Click or Start, and select All Programs or Programs. Select EpsonNet > EpsonNet Config > EpsonNet Config.
     • Mac: Open the Applications folder and select Epson Software > EpsonNet > EpsonNet Config > EpsonNet Config.

     Note: If nothing appears in the Search for Network box, make sure your product is connected to the same Wi-Fi network as your computer. If your product is connected to the same Wi-Fi network and the box is still blank, contact Epson Support.

  7. Click Add. Your product appears in the Scanner Settings window.
  8. Click OK.