Support Projectors LS Series Epson PowerLite Pro Cinema LS10000

Part of my image is blurry or out of focus. What should I do?

  • If the projected image is fuzzy or blurry, try the following solutions:

    • Adjust the image focus.
    • Clean the projection window.

      Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

    • Position the projector close enough to the screen, and directly in front of it.
    • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
    • Adjust the Sharpness setting to improve image quality.
    • If you are projecting from a computer using a VGA cable, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
    • If you are projecting from a computer, adjust the computer's resolution to match the projector's native resolution, if possible.
    • Make sure the screen is flat.
    Related tasks
    Focusing the Image
    Related references
    Input Signal Settings - Signal Menu
    Image Quality Settings - Image Menu
Published:  Nov 9, 2017 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​