Support Projectors LS Series Epson PowerLite Pro Cinema LS9600e

How do I use the WirelessHD Picture-in-Picture feature?

  • See below.

    Using the WirelessHD Picture in Picture Feature

    If you have connected multiple video sources to the WirelessHD transmitter, you can use the transmitter's Picture in Picture (P-in-P) feature to wirelessly project images from two separate sources at the same time. This feature is independent of any Picture-in-Picture capabilities of your projector.
    1. Make sure that the WirelessHD source is selected.
    2. Point the remote at the WirelessHD transmitter and press the WirelessHD P-in-P button on the remote control.
    3. Do the following to control the P-in-P display:
      • Press the Input button on the remote control or the WirelessHD transmitter to change the video source displayed in the sub-screen. Keep pressing the button to cycle through the connected video devices.
      • Press the Output button on the remote control or the WirelessHD transmitter to change the position of the sub-screen. The screen moves counterclockwise from corner to corner each time you press the Output button.
      • Press and hold the P-in-P button on the remote control to switch the sources shown in the main display and the sub-screen.
    4. When you are finished using Picture in Picture, press the WirelessHD P-in-P button on the remote control to resume normal projection.
Published:  Nov 7, 2014 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​