Support Projectors LS Series Epson Home Cinema LS100

I see the message No Signal. What should I do?

  • If the "No Signal" message appears, try the following solutions:

     

    • Press the Source Search button and wait a few seconds for an image to appear.
    • Press the Home button on the remote control to select from a list of available sources (shown in black text).
    • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
    • Check the connection from the projector to your video sources.
    • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
    • If necessary, turn the projector and the connected computer or video source off and then on again.
    • If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
    • Connect the video source directly to the projector.
    • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.
    Related tasks
    Selecting an Image Source
    Displaying From a PC Laptop
    Displaying From a Mac Laptop
    Related information
    Connecting to Computer Sources
Published:  Nov 9, 2017 Was this helpful?​ Thank you for the feedback!
Was this helpful?​
Please tell us why this was not helpful.​