- Store
- Printers
- Ink
- Projectors
- Scanners
- Point of Sale
- Robots
- Industries
- Support
Select the questions to view the answers
- My networked product is displaying an Event ID error code. What should I do?
- What is my product's native resolution?
- How do I set up a wireless connection?
- How do I play sound through my product?
- How do I connect a monitor to my product so I can simultaneously view images on the monitor and from my product?
- How can I improve the image quality?
- What is the EasyMP Monitor software?
- When my product is connected to the network with an Ethernet cable, my product locks up and all the error lights start flashing. What should I do?
- After upgrading EasyMP Monitor on my computer, no projectors appear on the screen when I launch EasyMP Monitor. What should I do?
- Can I view the image on my laptop or computer at the same time it is displayed on my product screen?
Select the questions to view the answers
- Nothing projects on the screen. What should I do?
- How do I connect a monitor to my product so I can simultaneously view images on the monitor and from my product?
- How do I adjust my product settings for rear and/or ceiling placement?
- How do I connect my image source to my product?
- Can my product do rear projection?
- What type of equipment can I connect to my product?
- Can I connect my product to a network?
- Can I project images from a computer over a USB connection?
- How do I connect my digital camera or other device to my product?
- I can't connect to my product using EasyMP Network Projection. What should I do?
- How do I set up a wireless connection?
- How do I connect my product?
- I am setting up my product wirelessly. The product's security setup menu does not allow me to enter a colon or space characters contained in my wireless network passphrase. What should I do?
- I am using Cisco VPN AnyConnect for Mac and cannot connect to my product using the EPSON EasyMP Network Projection Software v2.77, what is wrong?
Select the questions to view the answers
- I see the message No Signal. What should I do?
- The message Not Supported is displayed. What should I do?
-
The
power light will not turn on. What should I do?
- The product indicates an error. What should I do?
- The message Do you want to keep blocking this program? appears when I try to connect using the EasyMP Network Projection software in Windows XP Service Pack 2. What should I do?
- When I try to access the Network Configuration menu, my product displays the message, Protected by Password. Enter Password to use projector. What should I do?
- The product powers on when the lights in the room are turned on. What should I do?
- The EasyMP screen displays the following message: Obtaining an IP address, then displays a 169.254.xxx.xxx IP address when configuring my product wirelessly. What should I do?
Select the questions to view the answers
- I see dark vertical bands when projecting from a computer. What should I do?
- Part of my image is blurred or out of focus. What should I do?
- The image is not rectangular. What should I do?
- I see static or noise in the image. What should I do?
- Only part of the picture is displayed or the image looks distorted. What should I do?
- My displayed image appear jittery or shaky when I connect a DVD player or VCR to my product. What should I do?
- The image is too dark or light, or the colors are incorrect. What should I do?
-
How soon should I see an image after I press the Power button?
- How can I improve the image quality?
- How can I adjust the colors?
- How do I select the image source?
- Can I display on the screen and a computer monitor simultaneously?
- Can I view the image on my laptop or computer at the same time it is displayed on my product screen?
- I see only a black screen when I connect an HD video device to my product through an AV receiver using an HDMI cable. What should I do?
- When I browse through the image files on my USB drive, some of the .jpg files have an icon rather than the thumbnail preview. What should I do?
- The image from the projector is too big for a 16:9 screen. What should I do?
- How do I set the User's Logo to display when there is no signal?
- Images saved on the flash drive are not playing in correct order on the slide show. What is wrong?
- A black box appears where a video should appear when I project from my computer. What should I do?
Select the questions to view the answers
- How do I replace the lamp?
- When and how should I clean or replace the air filter?
- How do I reset the lamp timer to zero?
- How do I get a replacement lamp for my product?
- How and when should I clean the lens?
- When should I replace the projection lamp?
- Can I access the lamp and air filter with the ceiling mount installed?
- How do I clean my product case?
Select the questions to view the answers
- The remote control doesn't work. What should I do?
- The product's buttons don't work. What should I do?
- Can I use the remote control to click through slideshow-style presentations?
- Can I use the USB Type B port for both the USB display feature and remote mouse operation at the same time?
- Can I use the USB Display feature and the remote control as a wireless mouse at the same time?
- The remote control doesn't work as a wireless mouse. What should I do?
- How do I obtain a replacement remote control?
Select the questions to view the answers
- How do I set a password on my product?
- Can I access my product from different operating systems on the same network?
- Can my product be viewed via the Network Neighborhood on a Windows computer?
- After upgrading EasyMP Monitor on my computer, no projectors appear on the screen when I launch EasyMP Monitor. What should I do?
- What is the EasyMP Monitor software?
- I am not receiving mail when a product problem occurs. What should I do?
- When I present with the Epson Network Projection software, my presentation gets interrupted by another user connecting to the product. How can I block the other users from disconnecting my session?
Select the questions to view the answers
- There is no sound. What should I do?
- How do I play sound through my product?
- How do I output audio from my product when it is in standby mode?
- I do not get audio when multiple projectors are connected through the EasyMP Network Projection software. I do get audio when only one projector is connected. What is wrong?
Select the questions to view the answers
Select the questions to view the answers
- I entered the wrong password three times and now my product's operation is locked. What should I do?
- The product won't go into sleep mode. What should I do?
- Is there a recommended sequence of turning on my product and peripherals?
- How should I transport my product?
- I forgot my product's password. What should I do?
- What are the different Color Modes on the Video menu used for?
- What is my product's native resolution?
- Can I connect my product to external speakers?
- What accessories are available for my product?
- Does my product offer network monitoring and control capabilities?
- Can I change my product's network name?
- Which wireless security modes does my product support?
- How do I use the wireless projection feature?
- How does the Direct Power On function work?
- My older Mac doesn't support audio through an HDMI connection. How do I connect audio via HDMI?
- Is my product compatible with the ELPDC06 Document Camera?
- My networked product is displaying an Event ID error code. What should I do?
- When my product is connected to the network with an Ethernet cable, my product locks up and all the error lights start flashing. What should I do?
- What is the RS232 command to retrieve my product's temperature status?
- How do I control my product remotely over a network?
- Can I project an image from one computer to multiple products using the Multi-Screen Display and Windows 7?
- Is it okay to move my product right after I shut it down?
