For Work Robots Integrated Options I/O Expansion Board (RC620+ and RC180 Controller)
Discontinued

I/O Expansion Board (RC620+ and RC180 Controller)

  • Used for controlling peripheral devices like conveyors, feeders, etc.
  • Up to 48 Inputs and 32 Outputs can be added (2 boards max)
  • Tight Integration with Epson RC+ Software
  • View I/O Status using Epson RC+ I/O Monitor

The Epson RC180 and RC620+ Controllers come standard with 24 Inputs and 16 Outputs. However, many applications require additional I/O to allow the controller to interact with peripheral devices like conveyors, feeders, tooling, etc. For this reason Epson has the Expansion I/O Option. Up to 4 Expansion I/O boards can be added to the Epson RC Controllers. Once installed, the controller will recognize the additional I/O and allow access to it through the SPEL+ I/O commands, as well as the Epson RC+ I/O Monitor.

Important: To add Expansion I/O to the RC180 Controller, an Option Unit (option I/O board carrier) is required. Up to 2 option boards can be installed inside 1 Option Unit.